Články v časopisech
V letech 2016 až 2019 majících Journal Impact Factor dle Clarivate, od roku 2020 řadících se do Q1 nebo Q2 v rámci metrik Article Influence Score či Impact Factor dle Clarivate.
2023
SOSNA, P.; RUBEŠ, O.; HADAŠ, Z. Verification and analysis of advanced tuneable nonlinear vibration energy harvester. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2023, roč. 189, č. 110096, ISSN: 0888-3270. (odkaz)
KUBÍK, P.; ŠEBEK, F.; KREJČÍ, P.; BRABEC, M.; TIPPNER, J.; DVOŘÁČEK, O.; LECHOWICZ, D.; FRYBORT, S. Linear woodcutting of European beech: experiments and computations. WOOD SCIENCE AND TECHNOLOGY, 2023, roč. 57, s. 51-74. ISSN: 0043-7719. (odkaz)
ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; NÁVRAT, T.; ZAPLETAL, J. Multiaxial ductile fracture criteria coupled with non-quadratic non-prismatic yield surface in the predictions for a naturally aged aluminium alloy. INTERNATIONAL JOURNAL OF FRACTURE, 2023, roč. 239, s. 41-67. ISSN: 0376-9429. (odkaz)
PAPŠÍK, R.; ŠEVEČEK, O.; HOFER, A.; KRALEVA, I.; KREITH, J.; BERMEJO, R. Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion. Journal of the European Ceramic Society, 2023, roč. 43, č. 7, s. 2928-2934. ISSN: 0955-2219. (odkaz)
CHLUP, Z.; DRDLÍK, D.; HADRABA, H.; ŠEVEČEK, O.; ŠIŠKA, F.; ERHART, J.; MACA, K. Temperature effect on elastic and fracture behaviour of lead-free piezoceramic BaTiO3. Journal of the European Ceramic Society, 2023, roč. 43, č. 4, s. 1509-1522. ISSN: 0955-2219. (odkaz)
PAPŠÍK, R.; ŠEVEČEK, O.; MARTIN, É.; BERMEJO, R. Prediction of ring crack initiation in ceramics and glasses using a stress-energy fracture criterion. Journal of the American Ceramic Society, 2023, roč. 02. ISSN: 0002-7820. (odkaz)
APOSTOLOPOULOS, V.; NACHTNEBL, L.; MAHDAL, M.; PAZOUREK, L.; BOHÁČ, P.; JANÍČEK, P.; TOMÁŠ, T. Clinical outcomes and survival comparison between NexGen all‑poly and its metal‑backed equivalent in total knee arthroplasty. International Orthopaedics, 2023, roč. 4, č. 47, ISSN: 1432-5195. (odkaz)
FISCHER, J.; TURČANOVÁ, M.; MAN, V.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; BURŠA, J. Importance of experimental evaluation of structural parameters for constitutive modelling of aorta. Journal of the mechanical behavior of biomedical materials, 2023, roč. 138, č. 2, s. 105615. ISSN: 1751-6161. (odkaz)
POKORNÝ, J.; NÁVRAT, T.; VAJDÁK, M.; OTEVŘEL, M.; KOZÁK, J. Experimental validation of the operation of tilting-pad journal bearing lubricated by high-test peroxide under excessive vibrations and reduced flow of the lubricant. WEAR, 2023, roč. 523, č. 6, ISSN: 0043-1648. (odkaz)
2022
KOŠŤÁL, J.; ŠEBEK, F.; PETRUŠKA, J.; SEIFERT, T. Cyclic plasticity models and fatigue criteria for exhaust manifold life assessment in the context of limited material data available. MATERIALS AT HIGH TEMPERATURES, 2022, roč. 39, č. 1, s. 68-85. ISSN: 0960-3409. (odkaz)
HALABUK, D.; NÁVRAT, T. Determination of Residual Stresses in Cylindrical Components by the Hole-drilling Method. EXPERIMENTAL MECHANICS, 2022, roč. 62, č. 1, s. 87-99. sISSN: 0014-4851. (odkaz)
JAKKA, V.; BURŠA, J. Impact of physiological loads of arterial wall on nucleus deformation in endothelial cells: A computational study. COMPUTERS IN BIOLOGY AND MEDICINE, 2022, roč. 2022, č. 143, s. 105266-1 (105266-11 p.). ISSN: 0010-4825. (odkaz)
ŠEVEČEK, O.; KŠICA, F.; RUBEŠ, O.; MACHŮ, Z.; BOLCEK, J.; HADAŠ, Z. Analysis of piezoelectric skin on vibrating structure for energy harvesting and structural health monitoring applications. European Physical Journal-Special Topics, 2022, roč. 2022, č. 1, s. 1-8. ISSN: 1951-6355. (odkaz)
STACHIV, I.; MACHŮ, Z.; ŠEVEČEK, O.; TUHOVČÁK, O.; KOTOUL, M.; JENG, Y. Resolving measurement of large (similar to GDa) chemical/biomolecule complexes with multimode nanomechanical resonators. Sensors and Actuators B: Chemical, 2022, roč. 353, č. 15, s. 1-9. ISSN: 0925-4005. (odkaz)
HADAŠ, Z.; RUBEŠ, O.; KŠICA, F.; CHALUPA, J. Kinetic Electromagnetic Energy Harvester for Railway Applications-Development and Test with Wireless Sensor. SENSORS, 2022, roč. 22, č. 3, s. 1-19. ISSN: 1424-8220. (odkaz)
CARANDELL, M., TICHY, J., SMILEK, J., TOMA, D.M., GASULLA, M., DEL RÍO, J., HADAŠ, Z. Electromagnetic rolling mass wave energy harvester for oceanic drifter applications. European Physical Journal-Special Topics, 2022, č. 1, s. 1-10. ISSN: 1951-6355. (odkaz)
VOBEJDA, R.; ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J. Solution to problems caused by associated non-quadratic yield functions with respect to the ductile fracture. INTERNATIONAL JOURNAL OF PLASTICITY, 2022, roč. 154, s. 103301. ISSN: 0749-6419. (odkaz)
SKÁCEL, P.; BURŠA, J. Poisson's ratio and compressibility of arterial wall-Improved experimental data reject auxetic behaviour. Journal of the mechanical behavior of biomedical materials, 2022, roč. 131, č. 131, s. 105229. ISSN: 1751-6161. (odkaz)
VIČAR, T.; CHMELÍK, J.; NAVRÁTIL, J.; KOLÁŘ, R.; CHMELÍKOVÁ, L.; ČMIEL, V.; JAGOŠ, J.; PROVAZNÍK, I.; MASAŘÍK, M.; GUMULEC, J. Cancer cell viscoelasticity measurement by quantitative phase and flow stress induction. BIOPHYSICAL JOURNAL, 2022, roč. 121, č. 9, s. 1632-1642. ISSN: 0006-3495. (odkaz)
LISICKÝ, O.; AVRIL, S.; EYDAN, B.; PIERRAT, B.; BURŠA, J. Evaluation of image registration for measuring deformation fields in soft tissue mechanics. Strain, 2022, roč. 58, č. 3, s. 1-12. ISSN: 1475-1305. (odkaz)
APOSTOLOPOULOS, V.; TOMÁŠ, T.; BOHÁČ, P.; MARCIÁN, P.; MAHDAL, M.; VALOUŠEK, T.; JANÍČEK, P.; NACHTNEBL, L. Biomechanical analysis of all-polyethylene total knee arthroplasty on periprosthetic tibia using the finite element method. COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, 2022, roč. 220, č. 1, s. 1-9. ISSN: 0169-2607. (odkaz)
HALABUK, D.; NÁVRAT, T. Universal Procedure for Correction of Plasticity Effect in Hole‑Drilling Uniform Residual Stress Measurement. EXPERIMENTAL MECHANICS, 2022, roč. 62, č. 8, s. 1267-1287. ISSN: 0014-4851. (odkaz)
STACHIV, I.; MACHŮ, Z.; ŠEVEČEK, O.; JENG, Y.; LI, W.; KOTOUL, M.; PRÁŠEK, J. Achievable accuracy of resonating nanomechanical systems for mass sensing of larger analytes in GDa range. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2022, roč. 224, s. 1-15. ISSN: 0020-7403. (odkaz)
ŽÁK, S.; LASSNIG, A.; HRSTKA, M.; CORDILL, M. Buckling-induced delamination: Connection between mode-mixity and Dundurs parameters. Theoretical and Applied Fracture Mechanics, 2022, roč. 122, č. 12, s. 1-9. ISSN: 0167-8442. (odkaz)
2021
MACHŮ, Z.; RUBEŠ, O.; ŠEVEČEK, O.; HADAŠ, Z. Experimentally Verified Analytical Models of Piezoelectric Cantilevers in Different Design Configurations. SENSORS, 2021, roč. 21, č. 20, s. 6759-6782. ISSN: 1424-8220. (odkaz)
ŠEBEK, F.; KUBÍK, P.; TIPPNER, J.; BRABEC, M. Orthotropic elastic–plastic–damage model of beech wood based on split Hopkinson pressure and tensile bar experiments. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2021, roč. 157, s. 1-13. ISSN: 0734-743X. (odkaz)
CHAMRAD, J.; MARCIÁN, P.; ČÍŽEK, J. Beneficial osseointegration effect of hydroxyapatite coating on cranial implant - FEM investigation. PLOS ONE, 2021, roč. 16, č. 7, s. 1-16. ISSN: 1932-6203. (odkaz)
RUBEŠ, O.; CHALUPA, J.; KŠICA, F.; HADAŠ, Z. Development and experimental validation of self-powered wireless vibration sensor node using vibration energy harvester. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2021, roč. 160, č. 107890, s. 1-15. ISSN: 0888-3270. (odkaz)
JAKKA, V.; BURŠA, J. Finite Element Simulations of Mechanical Behaviour of Endothelial Cells. BioMed Research International, 2021, roč. 2021, č. 1, s. 1-17. ISSN: 2314-6141. (odkaz)
POKORNÝ, J. An efficient method for establishing the static equilibrium position of the hydrodynamic tilting-pad journal bearings. TRIBOLOGY INTERNATIONAL, 2021, roč. 153, č. 1, s. 1-14. ISSN: 1879-2464. (odkaz)
POLZER, S.; MAN, V.; VLACHOVSKÝ, R.; KUBÍČEK, L.; KRACÍK, J.; STAFFA, R.; NOVOTNÝ, T.; BURŠA, J.; RAGHAVAN, M. Failure properties of abdominal aortic aneurysm tissue are orientation dependent. Journal of the mechanical behavior of biomedical materials, 2021, roč. 114, č. 1, s. 1-7. ISSN: 1751-6161. (odkaz)
TURČANOVÁ, M.; HRTOŇ, M.; DVOŘÁK, P.; NOVÁK, K.; HERMANOVÁ, M.; BEDNAŘÍK, Z.; POLZER, S.; BURŠA, J. Full-Range Optical Imaging of Planar Collagen Fiber Orientation Using Polarized Light Microscopy. BioMed Research International, 2021, roč. 2021, č. 1, s. 1-13. ISSN: 2314-6141. (odkaz)
LISICKÝ, O.; HRUBANOVÁ, A.; STAFFA, R.; VLACHOVSKÝ, R.; BURŠA, J. Constitutive models and failure properties of fibrous tissues of carotid artery atheroma based on their uniaxial testing. JOURNAL OF BIOMECHANICS, 2021, roč. 129, č. 1, s. 110861. ISSN: 0021-9290. (odkaz)
2020
LISICKÝ, O.; MALÁ, A.; BEDNAŘÍK, Z.; NOVOTNÝ, T; BURŠA, J. Consideration of stiffness of wall layers is decisive for patient-specific analysis of carotid artery with atheroma. PLOS ONE, 2020, roč. 15, č. 9, s. 1-18. ISSN: 1932-6203. (odkaz)
ZELENIKA, S.; HADAŠ, Z.; BADER, S.; BECKER, T.; GLJUŠĆIĆ, P.; HLINKA, J.; JANAK, L.; KAMENAR, E.; KSICA, F.; KYRATSI, T.; LOUCA, L.; MRLIK, M.; OSMANOVIĆ, A.; PAKRASHI, V.; RUBES, O.; ŠEVEČEK, O.; SILVA, J. P. B.; TOFEL, P.; TRKULJA, B.; UNNTHORSSON, R.; VELAGIĆ, J.; VRCAN, Ž. Energy Harvesting Technologies for Structural Health Monitoring of Airplane Components-A Review. SENSORS, 2020, vol. 20, no. 22, p. 1-57. ISSN: 1424-8220. (odkaz)
RUBEŠ, O.; MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z. Crack Protective Layered Architecture of Lead-Free Piezoelectric Energy Harvester in Bistable Configuration. SENSORS, 2020, roč. 20, č. 20, s. 1-18. ISSN: 1424-8220. (odkaz)
ŠEVEČEK, O.; KOTOUL, M.; PROFANT, T.; HRSTKA, M. Crack kinking out of interface of two orthotropic materials under combined thermal/mechanical loading. Theoretical and Applied Fracture Mechanics, 2020, roč. 105, č. 1, s. 1-18. ISSN: 0167-8442. (odkaz)
ŠEBEK, F.; KUBÍK, P.; BRABEC, M.; TIPPNER, J. Modelling of impact behaviour of European beech subjected to split Hopkinson pressure bar test. COMPOSITE STRUCTURES, 2020, roč. 245, č. 1, s. 1-11. ISSN: 0263-8223. (odkaz)
NÁVRAT, T.; HALABUK, D.; VOSYNEK, P. Efficiency of Plasticity Correction in the Hole-Drilling Residual Stress Measurement. Materials, 2020, roč. 13, č. 15, s. 3396. ISSN: 1996-1944. (odkaz)
STACHIV, I.; GAN, L.; KUO, C.-Y.; ŠITTNER, P.; ŠEVEČEK, O. Mass Spectrometry of Heavy Analytes and Large Biological Aggregates by Monitoring Changes in the Quality Factor of Nanomechanical Resonators in Air. ACS Sensors, 2020, roč. 5, č. 7, s. 2128-2135. ISSN: 2379-3694. (odkaz)
MACHŮ, Z.; ŠEVEČEK, O.; HADAŠ, Z.; KOTOUL, M. Modeling of electromechanical response and fracture resistance of multilayer piezoelectric energy harvester with residual stresses. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2020, roč. 31, č. 19, s. 2261-2287. ISSN: 1530-8138. (odkaz)
HOFER, A.; WALTON, R.; ŠEVEČEK, O.; MESSING, G.; BERMEJO, R. Design of damage tolerant and crack-free layered ceramics with textured microstructure. Journal of the European Ceramic Society, 2020, roč. 2020, č. 40, s. 427-435. ISSN: 0955-2219. (odkaz)
2019
TOFEL, P.; MACHŮ, Z.; CHLUP, Z.; HADRABA, H.; DRDLÍK, D.; ŠEVEČEK, O.; MAJER, Z.; HOLCMAN, V.; HADAŠ, Z. Novel layered architecture based on Al2O3/ZrO2/BaTiO3 for SMART piezoceramic electromechanical converters. European Physical Journal-Special Topics, 2019, roč. 228, č. 7, s. 1575-1588. ISSN: 1951-6355. (odkaz)
KUBÍK, P.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; NÁVRAT, T. Ductile Failure Predictions for the Three-Point Bending Test of a Complex Geometry Made From Aluminum Alloy. Journal of Engineering Materials and Technology, 2019, roč. 141, č. 4, s. 1-12. ISSN: 0094-4289. (odkaz)
PEČ, M.; ŠEBEK, F.; PETRUŠKA, J. Basic Kinematic Hardening Rules Applied to 304 Stainless Steel and the Advantage of Parameters Evolution. MECH SOLIDS+, 2019, roč. 54, č. 1, s. 122-129. ISSN: 0025-6544. (odkaz)
HADAŠ, Z.; KŠICA, F.; RUBEŠ, O. Piezoceramic patches for energy harvesting and sensing purposes. European Physical Journal-Special Topics, 2019, roč. 228, č. 7, s. 1589-1604. ISSN: 1951-6355. (odkaz)
KŠICA, F.; HADAŠ, Z.; HLINKA, J. Integration and test of piezocomposite sensors for structure health monitoring in aerospace. MEASUREMENT, Journal of the International Measurement Confederation (IMEKO), 2019, roč. 147, č. 106861, s. 1-10. ISSN: 0263-2241. (odkaz)
SMILEK, J.; HADAŠ, Z.; VETIŠKA, J.; BEEBY, S. Rolling mass energy harvester for very low frequency of input vibrations. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019, č. 125, s. 215-228. ISSN: 0888-3270. (odkaz)
SKÁCEL, P.; BURŠA, J. Compressibility of arterial wall – direct measurement and predictions of compressible constitutive models. Journal of the mechanical behavior of biomedical materials, 2019, roč. 90, č. 1, s. 538-546. ISSN: 1751-6161. (odkaz)
OPLT, T.; ŠEBÍK, M.; BERTO, F.; NÁHLÍK, L.; POKORNÝ, P.; HUTAŘ, P. Strategy of plasticity induced crack closure numerical evaluation. Theoretical and Applied Fracture Mechanics, 2019, roč. 102, č. 1, s. 59-69. ISSN: 0167-8442. (odkaz)
MARCIÁN, P.; NARRA, N.; BORÁK, L.; CHAMRAD, J.; WOLFF, J. Biomechanical performance of cranial implants with different thicknesses and material properties: A finite element study. COMPUTERS IN BIOLOGY AND MEDICINE, 2019, č. 109, s. 43-52. ISSN: 0010-4825. (odkaz)
RUBEŠ, O.; BRABLC, M.; HADAŠ, Z. Nonlinear vibration energy harvester: Design and oscillating stability analyses. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2019, č. 125, s. 170-184. ISSN: 0888-3270. (odkaz)
BÁRTA, J.; UZHEGOV, N.; LOŠÁK, P.; ONDRŮŠEK, Č.; MACH, M.; PYRHÖNEN, J. Squirrel Cage Rotor Design and Manufacturing for High-Speed Applications. IEEE Transactions on Industrial Electronics, 2019, roč. 66, č. 9, s. 6768-6778. ISSN: 0278-0046. (odkaz)
ŠEVEČEK, O.; BERTOLLA, L.; CHLUP, Z.; ŘEHOŘEK, L.; MAJER, Z.; MARCIÁN, P.; KOTOUL, M. Modelling of cracking of the ceramic foam specimen with a central notch under the tensile load. Theoretical and Applied Fracture Mechanics, 2019, roč. 100, č. 1, s. 242-250. ISSN: 0167-8442. (odkaz)
HRSTKA, M.; PROFANT, T.; KOTOUL, M. Electro-mechanical singularities of piezoelectric bi-material notches and cracks. Engineering Fracture Mechanics, 2019, roč. 216, s. 106484. ISSN: 0013-7944. (odkaz)
ŠEBEK, F.; PARK, N.; KUBÍK, P.; PETRUŠKA, J.; ZAPLETAL, J. Ductile fracture predictions in small punch testing of cold-rolled aluminium alloy. Engineering Fracture Mechanics, 2019, roč. 206, č. 1, s. 509-525. ISSN: 0013-7944. (odkaz)
PROFANT, T.; HRSTKA, M.; KLUSÁK, J. An asymptotic analysis of crack initiation from an interfacial zone surrounding the circular inclusion. COMPOSITE STRUCTURES, 2019, roč. 208, č. 1, s. 479-497. ISSN: 0263-8223. (odkaz)
PEČ, M.; ZAPLETAL, J.; ŠEBEK, F.; PETRUŠKA, J. Low-Cycle Fatigue, Fractography and Life Assessment of EN AW 2024-T351 under Various Loadings. Experimental Techniques, 2019, roč. 43, č. 1, s. 41-56. ISSN: 0732-8818. (odkaz)
PEČ, M.; ŠEBEK, F.; ZAPLETAL, J.; PETRUŠKA, J.; HASSAN, T. Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351. Advances in Mechanical Engineering, 2019, roč. 11, č. 3, s. 1-14. ISSN: 1687-8140. (odkaz)
2018
Schroeder F; POLZER, S.; SLAŽANSKÝ, M.; MAN, V.; SKÁCEL, P. Predictive capabilities of various constitutive models for arterial tissue. Journal of the mechanical behavior of biomedical materials, 2018, vol. 78, no. 1, p. 369-380. ISSN: 1751-6161. (odkaz)
MAN, V.; POLZER, S.; GASSER, T.; NOVOTNÝ, T.; BURŠA, J. Impact of isotropic constitutive descriptions on the predicted peak wall stress in abdominal aortic aneurysms. MEDICAL ENGINEERING & PHYSICS, 2018, vol. 53, no. 1, p. 49-57. ISSN: 1350-4533. (odkaz)
NOVÁK, K.; POLZER, S.; BURŠA, J. Applicability of simplified computational models in prediction of peak wall stress in abdominal aortic aneurysms. Technology and Health Care, Int. Journal of Health Care Engineering, 2018, vol. 26, no. 1, p. 165-173. ISSN: 0928-7329. (odkaz)
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; HUTAŘ, P. Estimation of critical applied stress for crack initiation from a sharp V-notch. Theoretical and Applied Fracture Mechanics, 2018, no. 93, p. 247-262. ISSN: 0167-8442. (odkaz)
VAVERKA, J.; BURŠA, J.; ŠUMBERA, J.; PÁSEK, M. Effect of Transmural Differences in Excitation-Contraction Delay and Contraction Velocity on Left Ventricle Isovolumic Contraction: A Simulation Study. BioMed Research International, 2018, vol. 2018, no. 2018, p. 1-10. ISSN: 2314-6141. (odkaz)
OPLT, T.; HUTAŘ, P.; POKORNÝ, P.; NÁHLÍK, L.; CHLUP, Z.; BERTO, F. Effect of the free surface on the fatigue crack front curvature at high stress asymmetry. INTERNATIONAL JOURNAL OF FATIGUE, 2018, vol. 118, no. 2019, p. 249-261. ISSN: 0142-1123. (odkaz)
BANSOD, Y.; MATSUMOTO, T.; NAGAYAMA, K.; BURŠA, J. A Finite Element Bendo-Tensegrity Model of Eukaryotic Cell. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 2018, vol. 140, no. 10, p. 1-9. ISSN: 0148-0731. (odkaz)
PODUŠKA, J.; HUTAŘ, P.; FRANK, A.; KUČERA, J.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry. Engineering Fracture Mechanics, 2018, vol. 203, no. 2018, p. 18-31. ISSN: 0013-7944. (odkaz)
BAI, Y.; TOFEL, P.; HADAŠ, Z.; SMILEK, J.; LOŠÁK, P.; ŠKARVADA, P.; MACKŮ, R. Investigation of a cantilever structured piezoelectric energy harvester used for wearable devices with random vibration input. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, vol. 106, no. 106, p. 303-318. ISSN: 0888-3270. (odkaz)
ŠEBEK, F.; PETRUŠKA, J.; KUBÍK, P. Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy. Materials & Design, 2018, roč. 137, č. 1, s. 90-107. ISSN: 0264-1275. (odkaz)
KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J. Notched specimen under compression for ductile failure criteria. Mechanics of Materials, 2018, vol. 125, no. 1, p. 94-109. ISSN: 0167-6636. (odkaz)
HADAŠ, Z.; JANÁK, L.; SMILEK, J. Virtual prototypes of energy harvesting systems for industrial applications. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2018, roč. 110, č. 1, s. 152-164. ISSN: 0888-3270. (odkaz)
KOCIS, J.; KELBL, M.; KOCIS, T.; NÁVRAT, T. Percutaneous versus open pedicle screw fixation for treatment of type A thoracolumbar fractures. European Journal of Trauma and Emergency Surgery, 2018. (odkaz)
BERTOLLA, L.; CHLUP, Z.; TATARKO, P.; HANZEL, O.; ŠEVEČEK, O.; ROUPCOVÁ, P.; DLOUHÝ, I. Preparation and characterization of novel environmentally friendly Al2O3/SiO2/CaO ceramic foams. Ceramics International, 2018, roč. 44, č. 1, s. 19063-19069. ISSN: 0272-8842. (odkaz)
LEGUILLON, D.; MARTIN, É.; ŠEVEČEK, O.; BERMEJO, R. What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation? INTERNATIONAL JOURNAL OF FRACTURE, 2018, roč. 212, č. 1, s. 89-103. ISSN: 0376-9429. (odkaz)
MARCIÁN, P.; WOLFF, J.; HORÁČKOVÁ, L.; KAISER, J.; ZIKMUND, T.; BORÁK, L. Micro finite element analysis of dental implants under different loading conditions. COMPUTERS IN BIOLOGY AND MEDICINE, 2018, č. 96, s. 157-165. ISSN: 0010-4825. (odkaz)
KOTOUL, M.; PROFANT, T. Asymptotic solution for interface crack between two materials governed by dipolar gradient elasticity. Engineering Fracture Mechanics, 2018, roč. 201, č. 1, s. 80-106. ISSN: 0013-7944. (odkaz)
MARTIN, É.; LEGUILLON, D.; ŠEVEČEK, O.; BERMEJO, R. Understanding the tensile strength of ceramics in the presence of small critical flaws. Engineering Fracture Mechanics, 2018, roč. 201, č. 1, s. 167-175. ISSN: 0013-7944. (odkaz)
KUBÍK, P.; ŠEBEK, F.; PETRUŠKA, J.; HŮLKA, J.; PARK, N.; HUH, H. Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations. Theoretical and Applied Fracture Mechanics, 2018, roč. 98, č. 1, s. 186-198. ISSN: 0167-8442. (odkaz)
2017
LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; ŘEHÁK, P.; POKLUDA, J. Grain Boundary Segregation of Elements of Groups 14 and 15 and its Consequences for Intergranular Cohesion of Ferritic Iron. Journal of Materials Science, 2017, vol. 52, no. 1, p. 5822-5834. ISSN: 1573-4803. (odkaz)
ŁUCZAK, S.; GREPL, R.; BODNICKI, M. Selection of MEMS Accelerometers for Tilt Measurements. Journal of Sensors, 2017, vol. 2017, no. 9796146, p. 1-13. ISSN: 1687-7268. (odkaz)
HUTAŘ, P.; PODUŠKA, J.; ŠMÍD, M.; KUBĚNA, I.; CHLUPOVÁ, A.; NÁHLÍK, L.; POLÁK, J.; KRUML, T. Short fatigue crack behaviour under low cycle fatigue regime. INTERNATIONAL JOURNAL OF FATIGUE, 2017, vol. 103, no. October 2017, p. 207-215. ISSN: 0142-1123. (odkaz)
MASINI, A.; ŠIŠKA, F.; ŠEVEČEK, O.; CHLUP, Z.; DLOUHÝ, I. Elastic properties of multi- layered ceramic systems for SOCs. International Journal of Applied Ceramic Technology, 2017, roč. 2017, č. 1, s. 1-10. ISSN: 1744-7402. (odkaz)
HALABUK, D.; NÁVRAT, T. Thermomechanical assessment of fuel rod cladding made of zirconium alloy and silicon carbide material during reactivity-initiated accident. NUCLEAR SCIENCE AND ENGINEERING, 2017, roč. 189, č. 1, s. 69-81. ISSN: 0029-5639. (odkaz)
KOTOUL, M.; SKALKA, P.; ŠEVEČEK, O.; BERTOLLA, L.; MERTENS, J.;MARCIÁN, P.; CHAWLA, N. Crack bridging modelling in Bioglass® based scaffolds reinforced by poly-vinyl alcohol/ microfibrillated cellulose composite coating. Mechanics of Materials, 2017, roč. 110, č. 1, s. 16-28. ISSN: 0167-6636. (odkaz)
BOCCACCINI, D.; ŠEVEČEK, O.; FRANDSEN, H.; DLOUHÝ, I.; MOLIN, S.; HJELM, J.; CANNIO, M.; HENDRIKSEN, P. Determination of the bonding strength in solid oxide fuel cells’ interfaces by Schwickerath crack initiation test. Journal of the European Ceramic Society, 2017, roč. 2017, č. 37, s. 3565-3578. ISSN: 0955-2219. (odkaz)
RIDWAN-PRAMANA, A.; MARCIÁN, P.; BORÁK, L.; NARRA, N.; FOROUZANFAR, T.; WOLFF, J. Finite element analysis of 6 large PMMA skull reconstructions: A multi-criteria evaluation approach. PLOS ONE, 2017, roč. 12, č. 6, s. e0179325. ISSN: 1932-6203. (odkaz)
SMILEK, J.; HADAŠ, Z. Improving power output of inertial energy harvesters by employing principal component analysis of input acceleration. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2017, roč. 85, č. 1, s. 801-808. ISSN: 0888-3270. (odkaz)
JENÍK, I.; KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Sequential simulation and neural network in the stress–strain curve identification over the large strains using tensile test. ARCHIVE OF APPLIED MECHANICS, 2017, roč. 87, č. 6, s. 1077-1093. ISSN: 0939-1533. (odkaz)
NOVÁK, K.; POLZER, S.; KŘIVKA, T.; VLACHOVSKÝ, R.; STAFFA, R.; KUBÍČEK, L.; LAMBERT, L.; BURŠA, J. Correlation between transversal and orthogonal maximal diameters of abdominal aortic aneurysms and alternative rupture risk predictors. COMPUTERS IN BIOLOGY AND MEDICINE, 2017, roč. 83, č. 3, s. 151-156. ISSN: 0010-4825. (odkaz)
WANG, M.; GONG, Y.; ALZINA, F.; SVOBODA, O.; BALLESTEROS, B.; TORRES, C.; XIAO, S.; HE, J.; ZHANG, Z. Raman antenna effect from exciton–phonon coupling in organic semiconducting nanobelts. NANOSCALE, 2017, roč. 9, č. 48, s. 19328-19336. ISSN: 2040-3364. (odkaz)
2016
PODUŠKA, J.; HUTAŘ, P.; KUČERA, J.; FRANK, A.; SADÍLEK, J.; PINTER, G.; NÁHLÍK, L. Residual stress in polyethylene pipes. POLYMER TESTING, 2016, vol. 56, no. 2016, p. 288-295. ISSN: 0142-9418. (link)
MAJER, Z.; HUTAŘ, P.; FRANK, A.; ŠEVČÍK, M.; ZOUHAR, M.; PINTER, G.; NÁHLÍK, L. Point load effect on the buried polyolefin pipes lifetime. Polymer Engineering & Science, 2016, vol. 56, no. 1, p. 79-86. ISSN: 1548-2634. (odkaz)
ŽÁK, J.; HADAŠ, Z.; DUŠEK, D.; PEKÁREK, J.; SVATOŠ, V.; JANÁK, L.; PRÁŠEK, J.; Hubálek, J. The Charge Push-Through Electronics Design for Fully Implantable Artificial Cochlea Powered by Energy Harvesting Technologies. Microsystem Technologies, 2016, vol. 22, no. 7, p. 1709-1719. ISSN: 0946-7076. (odkaz)
NÁHLÍK, L.; ŠTEGNEROVÁ, K.; MÁŠA, B.; HUTAŘ, P. A failure scenario of ceramic laminates with strong interfaces. Engineering Fracture Mechanics, 2016, no. 167, p. 56-67. ISSN: 0013-7944. (link)
KUBÍK, P.; ŠEBEK, F.; HŮLKA, J.; PETRUŠKA, J. Calibration of ductile fracture criteria at negative stress triaxiality. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, roč. 108-109, č. 4, s. 90-103. ISSN: 0020-7403. (odkaz)
PETRUŠKA, J.; NÁVRAT, T.; ŠEBEK, F. Novel approach to computational simulation of cross roll straightening of bars. Journal of Materials Processing Technology, 2016, roč. 233, č. 7, s. 53-67. ISSN: 0924-0136. (odkaz)
ŠEBEK, F.; KUBÍK, P.; HŮLKA, J.; PETRUŠKA, J. Strain hardening exponent role in phenomenological ductile fracture criteria. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2016, roč. 57, č. 5-6, s. 149-164. ISSN: 0997-7538. (odkaz)
ŠEBEK, F.; KUBÍK, P.; PETRUŠKA, J.; HŮLKA, J. Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, roč. 47, č. 11, s. 5302-5312. ISSN: 1073-5623. (odkaz)
SKALKA, P.; NAVRÁTIL, P.; KOTOUL, M. Novel approach to FE solution of crack problems in the Laplacian-based gradient elasticity. Mechanics of Materials, 2015, roč. 2016, č. 95, s. 28-48. ISSN: 0167-6636. (odkaz)
RIDWAN-PRAMANA, A.; MARCIÁN, P.; BORÁK, L.; NARRA, N.; FOROUZANFAR, T.; WOLFF, J. Structural and mechanical implications of PMMA implant shape and interface geometry in cranioplasty – a finite element study. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY, 2016, roč. 44, č. 1, s. 34-44. ISSN: 1010-5182. (odkaz)
SUZUKI, N.; AOKI, K.; MARCIÁN, P.; BORÁK, L.; WAKABAYASHI, N. A threshold of mechanical strain intensity for the direct activation of osteoblast function exists in a murine maxilla loading model. Biomechanics and Modeling in Mechanobiology, 2016, roč. 15, č. 5, s. 1091-1100. ISSN: 1617-7959. (odkaz)
ŠEVEČEK, O.; KOTOUL, M.; LEGUILLON, D.; MARTIN, É.; BERMEJO, R. Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion. Engineering Fracture Mechanics, 2016, roč. 167, s. 45-55. ISSN: 0013-7944. (odkaz)
BOCCACCINI, D.; ŠEVEČEK, O. et al. Investigation of the bonding strength and bonding mechanisms of SOFCs interconnector-electrode interfaces. MATERIALS LETTERS, 2016, roč. 2015, č. 162, s. 250-253. ISSN: 0167-577X. (odkaz)
SMILEK, J.; HADAŠ, Z. A study of kinetic energy harvesting for biomedical application in the head area. Microsystem Technologies, 2016, roč. 22, č. 7, s. 1535-1547. ISSN: 0946-7076. (odkaz)
HADAŠ, Z.; VETIŠKA, V.; VETIŠKA, J.; KREJSA, J. Analysis and efficiency measurement of electromagnetic vibration energy harvesting system. Microsystem Technologies, 2016, roč. 22, č. 7, s. 1767-1779. ISSN: 0946-7076. (odkaz)
LEJČEK, P.; ŠANDERA, P.; HORNÍKOVÁ, J.; POKLUDA, J.; GODEC, M. On the Segregation Behavior of Tin and Antimony at Grain Boundaries of Polycrystalline bcc Iron. Applied Surface Science, 2016, roč. 363, č. 1, s. 140-144. ISSN: 0169-4332. (odkaz)
SKÁCEL, P.; BURŠA, J. Poisson's ratio of arterial wall – inconsistency of constitutive models with experimental data. Journal of the mechanical behavior of biomedical materials, 2016, roč. 54, č. 1, s. 316-327. ISSN: 1751-6161. (odkaz)
SLAŽANSKÝ, M.; POLZER, S.; BURŠA, J. Analysis of Accuracy of Biaxial Tests Based on their Computational Simulations. Strain, 2016, roč. 52, č. 5, s. 424-435. ISSN: 1475-1305. (odkaz)
KOUTNÁ, N.; HOLEC, D.; SVOBODA, O.; KLIMASHIN, F.; MAYRHOFER, P. Point defects stabilise cubic Mo-N and Ta-N. Journal of Physics D: Applied Physics, 2016, roč. 49, č. 37, s. 1-8. ISSN: 0022-3727. (odkaz)